Anolyte Cell Resources
ACR
CUSTOMERS
We would like to thank all of our customers and potential customers in advance for using our products. Thanks also for taking the time viewing our website. |
| OUR CUSTOMERS HAVE ASKED US TO MAKE CUSTOM CELLS TO MEET THEIR NEEDS, WE DID JUST THAT AND AT A PRICE THAT WAS VERY AFFORDABLE. ACR HAS MANUFACTURED NUMEROUS VARIATIONS AND CONFIGURATIONS OF ANOLYTE CELLS. ACR STILL THINKS OUTSIDE THE BOX. WE PRODUCE CELLS THAT ARE HORIZONTAL, VERTICAL, SURFACE, FLOOR AND A WHOLE LOT MORE...... |
| NEW FOR 2007. ACR INTRODUCES THE MODEL LD12H HORIZONTAL CELL. THIS IS THE BAD BOY OF HORIZONTALLY MOUNTED MEMBRANE CELLS. POWERED BY DUAL ELECTRICAL FEEDS TO THE ANODE AT OPPOSITE ENDS. FULLY SUBMERSIBLE. 5/8" LARGE RETURN PORT, INTEGRATED ANOLYTE FEED. SURGE RINGS. 12" VERTICAL ANODE X LENGTH. OUR CUSTOMER HAD (32) 24" EFFECTIVE LENGTH TUBULAR CELLS IN A HOIST SYSTEM. THEY COMPLAINED THAT COATING IS AN ISSUE TO MEET SPECS, pH IS HARD TO CONTROL, AND CAN'T TELL WHICH CELLS ARE WORKING OR NOT, OVERHEAD CLEARANCE CAUSED PROBLEMS WITH CLOSED TOP TUBE CELLS. THEY HAD RECEIVED A QUOTE FROM THE TUBULAR CELL COMPANY TO REPLACE THE 32 TUBULAR CELLS. THE COST WAS $26,000.00 REMEDY; ACR WAS CALLED, THE CELL IS SHOWN ABOVE PAIRED TOGETHER. THEY HAVE A SET OF THESE ON EACH SIDE OF THE TANK., GIVING A TOTAL OF 4 CELLS. THE CELLS HANG ON FRP BRACKETS THAT ARE ATTACHED TO THE EXISTING STRUT CHANNEL. NO MODIFICATIONS TO THE ORIGINAL TANK WERE REQUIRED, WE DESIGNED IT THAT WAY. THE COST FOR THE SYSTEM ENDED UP BEING 1/4 THE COST OF TUBULAR CELL. COATING IS NOW WITHIN SPECS WITH MORE THAN 15% LOWER RECTIFIER VOLTAGE .. pH IS UNDER CONTROL, CAPITAL COST, WELL THAT IS A BIG SAVINGS...TRUE STORY |
 | |  | |  | |  | |  | |  | |  | |  |
| EXOTIC ANODES IrO |
